Monday, January 9, 2012

diy:button hair pins

For this project you need:
*hair pins with a flat plate at the end to add things to (found at local craft store)
*E6000 glue
*an assortment of buttons in different sizes/colors/textures
1.Plan out which button combinations you would like to create and see which ones can actually work- sometimes the buttons have different fasteners on the back that prevent them from laying flat- or that need to be stacked.
 2. Using a small amount of the E6000 glue stack and glue buttons together for each pin, let dry at least 12 hours.
3. Put a small amount of E6000 on the flat plate of the pin and glue down your dried button stack, let dry 24 hours.

No comments:

Post a Comment